SubSyncer

Subtitle Frame-Rate Converter (23.976 ↔ 25 ↔ 24 FPS)

Fix PAL speedup and NTSC telecine drift instantly with broadcast frame-rate ratios and live Before/After timecode verification.

100% Client-Side · Zero Upload

Drop .srt, .vtt, .ass or .ssa file here

Multi-file drop supported · Processed 100% locally in your browser

Exact PAL Speedup & NTSC Inverse Math

European 25 fps PAL releases play 4.27% faster than 23.976 fps film masters. SubSyncer scales every cue start and end timestamp by exact ratio fromFps / toFps.

23.976 → 25 fps: ×0.95904 (-2.458s / min)

One-Click Broadcast Presets

Jump straight into 23.976 → 25 PAL, 25 → 23.976 NTSC, 23.976 → 24 True Cinema, or 29.97 → 23.976 inverse telecine presets without pulling out a calculator.

23.976 | 24 | 25 | 29.97 | 30 | 50 | 59.94 | 60

Visual Dual-Track Drift Comparison

Watch the amber synced blocks compress or stretch relative to the original track on the dual-track timeline before exporting your synced .srt, .vtt, or .ass file.

ORIG vs SYNC Timeline Verification

All SubSyncer Post-Production Utilities

Frequently Asked Questions

Why do subtitles synced for a 23.976 fps Blu-ray drift on a 25 fps PAL broadcast?

A 25 fps PAL master runs roughly 4.27% faster than 23.976 fps film. That creates ~2.46 seconds of drift every minute—nearly 4 minutes off by the end of a 100-minute movie.

How do I know which source and target FPS to choose?

Check your video file frame rate in VLC (Tools → Codec Information) or MediaInfo. If subtitles gradually fall behind the audio, convert from a lower FPS to a higher FPS (e.g. 23.976 → 25). If they run ahead, convert from higher to lower (25 → 23.976).

What if my video has both a constant intro offset and an FPS mismatch?

Switch to the "2-Point Anchor Sync" tab inside the FPS / Drift console. Anchoring the first and last spoken lines solves both the intro delay and the frame-rate stretch simultaneously.